Swing Technologies – Player Report

Advanced, athletic motion with a strong pivot, stable clubface, and an efficient 4:1 tempo. The main opportunities are refining upper-body posture at address, tightening the top-of-backswing structure, and ensuring the pelvis keeps turning through impact to avoid any late stall or high-right miss with the driver.

Numeric Swing Metrics

Key Frames – Click to Zoom

Key Frame	Image	Analysis
Address (Setup)		Strengths: Balanced stance with good width for a driver; weight evenly distributed with a slight bias to the trail side; shaft angle and hand position set up a neutral to slightly upward strike. Posture: Spine tilt away from target appropriate for driver; knee flex athletic without being excessive. Opportunities: Ensure the upper back stays long (avoid rounding shoulders) and that arms hang naturally under shoulders to reduce tension and help the club work on plane.
Club Parallel – Backswing		Strengths: Club head tracks close to the original shaft plane with the face in a neutral position (leading edge roughly matching spine angle), indicating solid grip and early takeaway. Body motion: Lower body remains stable with minimal sway; hips begin to rotate rather than slide. Opportunities: Maintain connection between lead arm and chest so the club doesn’t get too far inside; feel the handle working slightly “up” as the club moves back to keep width.
Lead Arm Parallel – Backswing		Strengths: Lead arm is extended with good width; trail leg maintains flex and supports a centered pivot; club shaft is close to parallel to the target line, suggesting a neutral path. Face control: Clubface remains square-to-slightly-closed relative to the swing arc, which is ideal for controlling curvature. Opportunities: Watch that the pelvis continues to rotate rather than allowing the trail hip to drift laterally; this keeps pressure more inside the trail heel and supports a powerful transition.
Top of Backswing		Strengths: Full shoulder turn with the back largely facing the target; trail leg braced and stable; club shaft in a neutral to slightly laid-off position, which promotes an in-to-out delivery. Structure: Lead arm remains relatively straight, maintaining radius and potential speed. Opportunities: Ensure the lead wrist stays more on the flat-to-slightly-flexed side to avoid the club getting across the line or overly long; feel a bit more pressure in the lead foot at the very top to pre-set a dynamic transition.
Lead Arm Parallel – Downswing		Strengths: Club shallows nicely under the original plane with the shaft pointing near the ball-target line; hips are opening while the upper body stays closed, creating good separation. Delivery: Hands are in front of the trail thigh with the clubhead trailing, indicating stored lag and potential for high clubhead speed. Opportunities: Keep the trail elbow in front of the trail hip (rather than stuck behind) to avoid blocks or over-draws; feel the chest continuing to rotate through this position.
Club Parallel – Downswing (Delivery)		Strengths: Club is on-plane with the shaft parallel to the target line and close to the hands; face angle is square to the arc, which is ideal for straight-to-slight-draw ball flights. Body motion: Lower body continues to open, and spine tilt is preserved, supporting an upward strike with the driver. Opportunities: Guard against the pelvis stalling here; feel the belt buckle and chest continuing to turn left so the hands don’t have to flip to square the face.
Impact		Strengths: Hands slightly ahead of the clubhead with a stable lead wrist; hips open relative to the target line; spine tilted away from target, promoting a positive attack angle. Strike: Clubhead traveling from slightly inside to square, ideal for a controlled draw pattern. Opportunities: Ensure the lead leg is fully braced and extended enough to provide a firm post; avoid any last-moment handle raise that could change dynamic loft and strike location on the face.
Follow Through		Strengths: Arms fully extended past impact with the club exiting left and around the body; indicates good rotation and energy transfer. Face/path: Clubface continues to rotate naturally with the body, not excessively flipped by the hands. Opportunities: Keep the chest moving toward the target and up, avoiding any “stuck” feeling where the arms outrun the torso.
Finish		Strengths: Balanced, fully rotated finish with weight predominantly on the lead side and trail foot up on the toe; indicates good rhythm and control. Posture: Spine relatively tall with the club wrapped around the body, showing that speed was carried through the ball, not just to it. Opportunities: Hold the finish for a full count to reinforce balance and tempo; any tendency to fall back or step out would signal minor sequencing issues under pressure.

Main Faults

• Slight tendency for the upper body to round at address, which can encourage the club to work a bit inside early and add tension in the shoulders.
• Top-of-backswing can get a touch long if the lead wrist extends; this risks the shaft drifting off-line and can promote timing-dependent squaring of the face.
• Potential for the pelvis to slow down through the delivery phase, which may cause the arms to overtake and lead to blocks or over-draws with the driver.
• Occasional handle raise through impact, which can move strike higher on the face and slightly alter dynamic loft and start line.

Recommended Drills

• Posture & Arm Hang Check (Mirror Drill) – Set up in front of a mirror down-the-line. Ensure the chest is proud (not rounded), hips hinged back, and arms hanging directly under the shoulders. Hold for 5 seconds before each ball for a dozen reps to ingrain a consistent driver posture.
• Lead-Wrist Structure at the Top – Make slow-motion backswings to the top while monitoring the lead wrist (use a mirror or video). Pause at the top with the lead wrist feeling flat-to-slightly-flexed and the club shaft pointing parallel to the target line. Hit 3 balls in slow motion for every 1 at full speed.
• Step-Through Rotation Drill – Hit drivers where, after impact, you step your trail foot toward the target (like a baseball step-through). This encourages continuous hip and chest rotation so the pelvis doesn’t stall and the club exits left with the body.
• Pump to Lead-Arm-Parallel Downswing – From the top, “pump” the club down to lead-arm-parallel three times, feeling the shaft shallow and the trail elbow in front of the trail hip while the hips keep turning. On the third pump, swing through to a full finish. Great for syncing arm slot with body rotation.
• Impact Handle Height Gate – Place two alignment sticks vertically in the ground (or foam noodles) just outside the shaft on both sides of the ball, creating a “gate” for the handle. Make swings focusing on returning the handle through the same height and space, preventing last-second handle raise and stabilizing strike location.

Video Playback